Samsung WD10 K6 /X Series - Page 23

Disassembly and Reassembly_21
Partname Description Figure
BUBBLEPUMP
ANDDRAINPUMP
1.Gentlypressthetopareafotheltecover
to open.
Thenseperateframefront.
2.Removetheremainingwaterthroughthe
drainagehose.
Placeabowlunderthedrainagehose,or
theremainingwatermayowout.
3.SeparatetheDrainFilterbyturningit
counterclockwise
Sincetheremainingwatermayowout,
placeabowlunderneathitwhenseparat-
ingthelter.
4.Removethe2screwsholdingtheDrain
Pump.
5.Disconnecttheterminalofwire.
WD6500K_7-8-9-11kg_1400rpm-SM.indb 21 2018/11/9 9:53:08