Samsung WD7 T Series User Manual (English)

Other manuals for Samsung WD7 T Series

Questions and Answers:

R
Roger CarterSep 9, 2025
Why is there insufficient water supply to my Samsung WD7 T Washer?
- A
  Amanda TaylorSep 10, 2025
  If your Samsung Washer isn't getting enough water, or no water at all, try the following: * Fully open the water tap. * Ensure the door is properly closed. * Check that the water supply hose isn't frozen, kinked, or clogged. * Make sure there is sufficient water pressure. * Verify that the cold and hot water taps are properly connected. * Clean the mesh filter, as it may be clogged.
A
aprilnicholsAug 25, 2025
How to fix Samsung WD7 T that does not start?
- C
  Christopher ElliottAug 25, 2025
  If your Samsung Washer doesn't start, ensure it's plugged in, the door is properly closed, and the water taps are open. Tap and hold to start the washing machine. Also, verify that Child Lock is not activated. Check the fuse or reset the circuit breaker, and confirm that power is supplied properly. If the low voltage was detected, check if the power cord is plugged in. Ensure laundry isn't caught in the door. If the AddWash door is open, close it properly and tap and hold to resume operation.
M
michael41Aug 25, 2025
What to do if Samsung Washer does not drain or spin?
- A
  Andrea MartinAug 26, 2025
  If your Samsung Washer doesn't drain or spin, ensure the drain hose is straightened and not frozen or clogged. Make sure the debris filter is not clogged. Close the door and tap and hold. Also, ensure the drain hose is connected to a drain system that is not clogged and is positioned correctly, depending on the connection type. If the washing machine is not supplied with sufficient power, the washing machine will temporarily not drain or spin. As soon as the washing machine regains sufficient power, it will operate normally. If you encounter a drain problem, call for service.
A
Andrea HowardAug 26, 2025
Why is my Samsung WD7 T Washer leaking water?
- C
  Christy BarajasAug 27, 2025
  If your Samsung Washer leaks water, ensure the door is properly closed and all hose connections are tight. Verify the drain hose is correctly inserted and secured to the drain system, and that it's not placed on the floor or clogged. Avoid overloading the machine and use high-efficiency (HE) detergent to prevent oversudsing.
M
Melanie HooverAug 27, 2025
What to do if the door of Samsung WD7 T does not open?
- M
  Mrs. Kendra CruzAug 27, 2025
  If the door of your Samsung Washer doesn't open, tap and hold to stop the washing machine. Allow a few moments for the door lock mechanism to disengage. The door will not open until 3 minutes after the washing machine has stopped or the power has been off. Make sure all the water in the drum is drained and the door lock light is off. If water remains in the drum, drain it and open the door manually.
E
Eugene DelgadoSep 8, 2025
Why is the water supply insufficient in my Samsung WD7 T Washer?
- R
  Robert BaldwinSep 9, 2025
  If your Samsung Washer isn't getting enough water, or no water at all, consider the following: * Fully open the water tap. * Ensure the door is properly closed. * Check that the water supply hose isn't frozen, kinked, or clogged. * Make sure there's sufficient water pressure. * Verify that the cold and hot water taps are correctly connected. * Clean the mesh filter, as it may be clogged.
J
Justin AdamsSep 7, 2025
Why is my laundry still wet after Samsung Washer cycle?
- A
  alyssa66Sep 7, 2025
  If your laundry is still wet after a Samsung Washer cycle, try using the High or Extra High spin speed. Use high-efficiency (HE) detergent to reduce oversudsing. Small loads (one or two items) may become unbalanced and not spin completely. Ensure the drain hose is not kinked or clogged.
R
robinsonscottSep 8, 2025
Why Samsung Washer takes longer time to wash?
- A
  Aaron CraigSep 8, 2025
  The actual washing time may differ from the estimated time initially displayed on the control panel upon cycle selection.
M
Martha WilliamsSep 2, 2025
How to reduce vibration of Samsung Washer?
- J
  Jacob HamiltonSep 2, 2025
  If your Samsung Washer vibrates excessively or makes noise, ensure it's installed on a level, solid, and non-slippery floor. Make sure the shipping bolts are removed and the washing machine isn't in contact with any other object. Ensure the laundry load is balanced. Note that the motor can cause noise during normal operation, and metal objects like coins can also cause noise. Redistribute the load. If only one item of clothing needs washing, such as a bathrobe or pair of jeans, the final spin result might be unsatisfactory, and a 'Unbalanced laundry detected' check message will be shown in the display.
W
William MackAug 31, 2025
Why is there no water coming into my Samsung Washer?
- I
  ihudsonAug 31, 2025
  If your Samsung Washer isn't getting enough water, or no water at all, consider the following: * Fully open the water tap. * Make sure the door is properly closed. * Ensure the water supply hose is not frozen, kinked, or clogged. * Confirm there is sufficient water pressure. * Verify that the cold and hot water taps are properly connected. * Clean the mesh filter as it may be clogged.