English 17
Installation
STEP 5 Position the drain hose
The drain hose can be positioned in three ways:
60
~
90 cm
60
~
90 cm
60 cm
Over the edge of a wash basin In a drain pipe In a sink drain pipe branch
CAUTION
Remove the lid on the sink drain pipe branch before connecting the drain pipe to it.
STEP 6 Power on
Plug the power cord into a wall socket protected by a fuse or circuit breaker. Then, tap and hold for 3 seconds to
turn on the washing machine.
NOTE
• Before doing your laundry for the first time, you must run a complete wash cycle without any items in the drum.
• If the display does not respond to control inputs. Remove the sticker.
U-PJT_COMBO-AD_SimpleUX_MANUAL_DC68-04198A-04_EN.indd 17 2022/7/11 9:47:33
To Next Page
Loading...
