Samsung WD8 T Series - Page 23

English
English23
Connecting to a non-threaded water tap
A
B
1. Remove the adaptor (A) from the water hose (B).
2. Use a Phillips screwdriver to loosen four screws on
the adaptor.
C
3. Hold the adaptor and turn part (C) in the arrow
direction to loosen it by 5 mm (*).
C
4. Insert the adaptor onto the water tap, and then
tighten the screws while lifting the adaptor.
5. Turn part (C) in the arrow direction to tighten it.
U-PJT_COMBO-AD_SimpleUX_WEB_SSEC-02__EU_English.indd 23 2022/4/16 11:05:18