Samsung WD8 T Series - Page 43

English
English43
Prewash
You can add a preliminary washing cycle before the main wash cycle.
1. Select a cycle and change the cycle settings as necessary.
2. Tap
.
3. Turn the Navigation dial to select Prewash, and then tap
.
4. Tap and hold
.
Bubble Soak
This function helps remove a wide variety of stubborn stains. With Bubble Soak selected, laundry is
thoroughly soaked in water bubbles for effective washing.
1. Select a cycle and change the cycle settings as necessary.
2. Tap
.
3. Turn the Navigation dial to select Bubble Soak, and then tap
.
- Bubble Soak is available with and adds up to 30 minutes to these cycles: Cotton, Synthetics, Bedding,
and Super Speed.
4. Tap and hold
.
Intensive
For badly soiled laundry. The operation time for each cycle is longer than normal.
1. Select a cycle and change the cycle settings as necessary.
2. Tap
.
3. Turn the Navigation dial to select Intensive, and then tap
.
4. Tap and hold
.
Dose per Wash
You can increase or decrease the amount of detergent dispensed automatically.
1. Tap
.
2. Turn the Navigation dial to select Dose per Wash, and then tap
.
3. Tap
to select the desired setting.
- Default setting is Med. (Medium).
- You can select from Med., High, Off, or Low.
Dose per Rinse
You can increase or decrease the amount of detergent dispensed automatically.
1. Tap
.
2. Turn the Navigation dial to select Dose per Rinse, and then tap
.
3. Tap
to select the desired setting.
- Default setting is Med. (Medium).
- You can select from Med., High, Off, or Low.
U-PJT_COMBO-AD_SimpleUX_WEB_SSEC-02__EU_English.indd 43 2022/4/16 11:05:23