Samsung WD8704EJZ - Page 19

setting up your new washing machine _19
01 setting up
6. Turn on the water supply and ensure that no water leaks
fromthewatervalve,taporadaptor.Ifthereisawater
leaks,repeattheprevioussteps.
Donotuseyourwashingmachineifthereisawaterleak.
This may cause electric shock or injury.
• Ifthewatertaphasascrewtypetap,connectthewater
supply hose to the tap as shown.
Usethemostconventionaltypeoftapforthewatersupply.Incasethetapissquareortoo
big,removethespacingringbeforeinsertingthetapintotheadaptor.
✗
✗

WD8704RJ-02718A-07_EN.indd 19 2014/6/11 17:14:01