2
■
How to Remove Shipping Bolts
1. Remove the screws by using
the supplied spanner.
2. Remove the shipping bolts
from the back of the unit.
3. Fill the holes with the
supplied plastic caps.
4. Keep the shipping bolts and
screws for future use.
Make sure that the unit stands
on a firm and leveled floor.
Keep it away from direct sunlight
or high humidity, and install it
in a place with good ventilation.
Keep the unit away from places
in which it is freezing,
especially in winter.
Keep the unit away from heat
appliances such as a heater.
1-2.Precautions upon Installation
■ Precautions before
Installation
The unit is quite heavy. So,
make sure to have 2 or more
personnel move it.
Install the unit at a place
with a wall outlet easily
accessible.
To Next Page
Loading...
