12
1) Auto power S/W off function
●
After power on, the auto power S/W off function automatically switches power off for you if you do not
press selection button for 10 minutes
●
After selecting the function, the auto power S/W off function automatically switches power off for you if
you do not press start/pause button for 10 minutes
●
until 5 minutes past, After finishing the last function, the auto power S/W off function automatically
switches power off for you if you do not re-select the course button or manual button
2) Door open function
●
Door just can be opened at water level 24.80 KHz over, water temperature 55
℃
below, motor off, if
power is off door is not opened (only auto-door model)
●
If door is open during the operating, all operating is halted, and door error message will be displayed
(2-digit panel displays "dE" 4-digit panel displays "door") and error melody will coming out
●
Door open error can be cleared by closing the door. the operating keeps going on
3) Rinse hold function
●
If rinse hold function selected, the operating is finished , the machine do not drain the water after last
rinse
4) No spin function
●
If no spin function selected, the operating is finished after last rinse
5) Drain function
●
Drain function is over, after pumping out the water for 2 minutes , without motor rotating
6) Pre-washing function
●
Pre-washing function can be selected ,when you choice the following mode; cotton, coloreds, synthetics,
delicates, baby cotton, baby coloreds, baby delicates, baby stains
●
Water level/reverse time is the same with the selected course
●
Pre-washing takes about 16 minutes
7) Rinse+ function
●
This function practises rinse process once more
3-3. MAIN FUNCTION
To Next Page
Loading...
