Samsung WF-F1256 - Assembly and Disassembly Procedures; Required Tools for Servicing

25
5-1. TOOLS FOR DISASSEMBLY AND ASSEMBLY
5.
ASSEMBLY AND DISASSEMBLY
NO. TOOL
1
Box driver
10mm
13mm
19mm
Heater (1)
Motor (1), Balance (5), 2 holes of each left and right of the shock absorber
1 Pulley hole
2
Double-ended
spanner
10, 13,19mm
Replaceable for the box driver.
Since the bolt runs idle when the box driver is used, use the box
driver 17mm.
3
Vice pliers Tool to protect the idle and abrasion of the bolt for the box driver.
4
Other(Driver, Nipper, Long nose) General tools for the after service.
5
JIG for the Tub 1 (Disassemble and Assemble)