29
Part Name Descriptive Picture How To Do
BELT
MOTOR
Before removing the belt, should be opened
the Cover Bottom.
ⓛ
Remove the belt before the re-assembly.
②
Ensure the belt is placed o n the center of
the motor pulley.
<Belt Assembly>
Hang the belt on the motor pulley(
①
)
before placing it around the pulley (
②
)
ⓛ
Removethewirehousingfromthemotor.
②
Remove the bolts holding the motor by using
the power screwdriver.
③
Remove the motor.
①
②
To Next Page
Loading...
