34
Part Name Descriptive Picture How To Do
②
Disconnect the Connector Housing.
③
Remove the n ut holding the Heater and
separate the Heater.
④
Take out the Heater from the Tub.
(
※
Caution: Be sure to insert the Heater into
the Bracket in the Tub. If not, it may cause
a fire. And, make sure to have the Packing
seating on its place. Fasten the nut with
5Kgf/
㎠
. If the nut is fastened loosely, it
may cause water leakage.)
To Previous Page
Loading...
