To Next PageTo Next PageHow to fix a Samsung WF361 that will not start?
If your Samsung Washer won't start, ensure the door is firmly closed, the washer is plugged in, and the water source faucets are open. Press the Start/Pause Button and check that the Child Lock is not activated. Also, check the fuse or reset the circuit breaker.
Why is my Samsung WF361 leaking water?
If your Samsung Washer leaks water, make sure the door is firmly closed and all hose connections are tight. Ensure the end of the drain hose is correctly inserted and secured to the drainage system. Avoid overloading and use high-efficiency detergent to prevent over-sudsing.
How to prevent excessive suds in Samsung WF361?
If your Samsung Washer has excessive suds, use high-efficiency detergent to prevent over-sudsing. Reduce the detergent amount for soft water, small, or lightly soiled loads, and make sure you are using HE detergent.
What to do if Samsung WF361 door is locked?
If the door of your Samsung Washer is locked or will not open, press the Start/Pause Button to stop your washer. Note that your washer door will remain locked during the heating portion of the Sanitize Cycle.
What to do if Samsung WF361 Washer is not draining?
If your Samsung Washer is not draining, first, clean the drain filter. Turn the unit off and then on again. You can also select only the Spin Cycle or clean the debris filter.
Samsung WF361 Washer: what to do if the door will not unlock?
If the door of your Samsung Washer will not unlock, make sure the door is firmly closed. Push the Power button to turn off your washer, then turn it on again.
What to do if unbalanced load prevented Samsung WF361 Washer from spinning?
If an unbalanced load prevented your Samsung Washer from spinning, redistribute the load, then press the Start/Pause Button.
What to do if my Samsung WF361 Washer has no water?
If your Samsung Washer has no water or not enough water, fully turn on both faucets and ensure the door is tightly closed. Straighten the water inlet hoses. The hose filter screens may be plugged, so disconnect the hoses and clean the screens. You can also open and close the door, then press the Start/Pause Button.
Why Samsung Washer does not drain and/or spin?
If your Samsung Washer does not drain and/or spin, check the fuse or reset the circuit breaker. Straighten the drain hoses, close the door, and press the Start/Pause Button. Also, ensure the debris filter is not clogged.
How to reduce vibration of a Samsung Washer?
If your Samsung Washer vibrates or is too noisy, ensure it is set on a level surface and that the shipping bolts are removed. Also, confirm that the washer is not touching any other object and that the laundry load is balanced.
General
