To Next PageTo Next PageWhat to do if Samsung WF361 Washer load is too wet?
If the load is too wet at the end of the cycle in your Samsung Washer, use the High or Extra High spin speed. Also, use high-efficiency detergent to reduce over–sudsing. Note that a load that is too small can also cause this issue.
Why is there an insufficient amount of water in my Samsung WF361 Washer?
The Front Loading Samsung Washer provides maximum performance using a small amount of water. Since the water fill is not completed at the beginning of the wash, the amount of water may appear to be small. Also, the amount of time that water is supplied differs depending on the type of laundry, so the amount of water may seem small.
Samsung WF361: what to do if the fill was unsuccessful?
If your Samsung Washer has tried to fill but was unsuccessful, make sure the water faucets are open all the way. Also, check for kinked hoses and the inlet screens on the fill hoses.
Why does my Samsung WF361 keep stopping?
If your Samsung Washer stops, plug the power cord into a live electrical outlet and check the fuse or reset the circuit breaker. Close the door and press the Start/Pause Button. Check the screens on the inlet hoses at the faucets for obstructions.
Why Samsung WF361 Washer fills with wrong temperature water?
If your Samsung Washer fills with the wrong temperature water, fully turn on both faucets and make sure the temperature selection is correct. Ensure the hoses are connected to the correct faucets. Check your water heater; it should be set to deliver a minimum 120° F (49° C) hot water at the tap. You can also disconnect the hoses and clean the screens.
Describes the washer's ability to handle bulky items for a cleaner wash.
Explains the technology that minimizes noise and vibration during operation.
Details the motor's power, efficiency, and quiet operation for improved performance.
Highlights the NSF certified cycle for eliminating 99.9% of bacteria at high temperatures.
Introduces the specialized program for keeping the drum clean and odor-free.
Explains the safety feature preventing children from interfering with washer operation.
Allows users to delay wash cycles for up to 19 hours for added convenience.
Describes an optional 15" pedestal for raising the washer and providing storage.
Details how washers and dryers can be stacked to maximize space using an optional kit.
Provides essential guidelines for the safe installation and operation of the appliance.
Explains the meaning of icons and signs used to indicate hazards and precautions.
Lists crucial warnings related to the electrical supply, grounding, and placement during installation.
Outlines important safety precautions to follow during the operation of the washing machine.
Provides essential safety guidelines to follow when cleaning the appliance.
Guide to unpacking and inspecting all received items for shipping damage or missing parts.
Details electrical, water pressure, grounding, and location needs for proper setup.
Covers alcove, undercounter, and other installation clearances for optimal placement.
Explains requirements and dimensions for installing the washer with optional pedestals or stacking kits.
Provides a step-by-step guide for installing the washing machine, including leveling and connections.
Instructions on how to properly load laundry, including avoiding overload and adding items.
Guide to initiating a wash cycle, from loading to pressing start.
Explanation of the various buttons and indicators on the washing machine's control panel.
Details on how to activate, pause, and deactivate the child lock safety feature.
Information on Spin Only, Garment+, and Steam Wash features for specific laundry needs.
Guidance on selecting and using the correct detergents and additives for optimal cleaning.
Instructions for using the bleach and fabric softener dispenser compartments correctly.
Guidelines for cleaning the exterior, interior, and dispensers to maintain performance.
Step-by-step instructions for cleaning the debris filter to ensure proper drainage.
Methods for cleaning the door seal and preserving the washer's exterior finish.
Explains how to use the Pure Cycle function for regular drum cleaning and maintenance.
Addresses issues like failure to start, no water, vibration, and stopping with solutions.
Covers problems such as incorrect temperature, door issues, leaks, and odors with remedies.
Explains error codes displayed on the panel and their corresponding solutions or service needs.
Provides symbols and guidelines for washing, bleaching, drying, and ironing different fabrics.
Information on environmental considerations, conformity, and technical specifications.
A guide to selecting the best cycle and options for various laundry loads and fabric types.
Details the terms and conditions of the warranty for purchasers in the United States.
Outlines the warranty coverage and terms for customers in Canada.
General
