Removal and Reassembly _ 9
3. DISASSEMBLY AND REASSEMBLY
3-1. TOOLS FOR DISASSEMBLY AND REASSEMBLY
Tool Type Remarks
Box driver
10mm
Heater(1),Tub(12), Fixer screw(5), Motor(2),
Balance(9)
13mm
Shock Absorber (2 holes each in left/right),
Damper(2), Damper(friction 2)
19mm Pulley(1)
Double-ended
spanner
10mm
13mm
19mm
Replaced by box driver
Leg
Vice pliers
A Tool for protecting empty turning of bolt or
abrasion from using box driver
For disassembly of Spin drum
Others
(screwdriver, nipper,
long nose pliers)
Common tools for servicing
To Next Page
Loading...
