Samsung WF365BTB series - Page 16

14 _ Removal and Reassembly
Part Figure Description
Disassembling and
Reassembling the
Door Part
1. Removethe2screwsholdingtheHINGE-DOOR
andtheFRAME-FRONT.
2. DisassembletheASSYDOORliftingitup
slightly.
3. Removethe15screwsxingtheHOLDER-
GLASS(includingthe2bluescrewsholdingthe
LEVER-DOOR).
4. DisassembletheHOLDER-GLASSfrom
COVER-DOOR.
5. Removethe8screwstoseparatetheHINGE-
DOOR.
4 Check Points for Troubleshooting
• CheckthestatusofthescrewsholdingtheHinge(checkiftheyareloose).Checkifthe
frontandrearofthedoorandthehingepartarenotdamaged.