26_ Installing your washer
Installing your washer
Setting the current time
1. Set the time by tapping on the up and down
arrows.
2. Tap the Next button when done.
After completing the initial setup, you can access each step and change your preferences any time
using the Settings control located at the bottom right of the Cycle Selection screen displayed on the
LCD panel.
For example, If you want to set the time again...
1. Tap the Settings at the bottom right of the Cycle Selection screen.
2. Tap the Time & Language at the Settings screen.
3. Tap the Change button under the Time.
4. Tap the up and down arrows to change the time.
5. Tap the OK button.
You can view and change the settings of the Language, Date, and Network through the same steps
above.
WF457ARG-03153A_EN.indd 26WF457ARG-03153A_EN.indd 26 2012-03-09 4:09:282012-03-09 4:09:28
To Next Page
Loading...
