Maintenance
English44
Maintenance
Pump lter
You should clean the pump lter 5 or 6 times a year to prevent it from clogging. A
clogged pump lter may reduce the bubble effect.
1. Turn off the washer, and then unplug
the power cord.
2. Gently press the top area of the lter
cover to open.
3. Drain the remaining water inside the
drum. See the Emergency drain section
on page 42.
4. Turn the pump lter knob (A)
counterclockwise, and then drain the
remaining water.
5. Clean the pump lter using a soft brush.
Make sure the drain pump propeller
inside the lter is not clogged.
6. Reinsert the pump lter, and then turn
the lter knob clockwise.
7. Close the lter cover.
NOTE
• Some pump lters feature a safety
knob that is designed to prevent
children from accidentally opening the
lter compartment. To open the safety
knob of the pump lter, push in and
turn it counterclockwise. The spring
mechanism of the safety knob helps
open the lter.
• To close the safety knob of the pump
lter, turn it clockwise. The spring
makes a rattling sound, which is normal.
• Before closing the lter cover, make
sure the pump lter is properly
inserted.
Untitled-31 44 2020-03-02 PM 3:19:42
To Next Page
Loading...
