Samsung WF520AB Series - Location and Electrical Requirements

Removal and Reassembly _ 11
3. DISASSEMBLY AND REASSEMBLY
3-1. TOOLS FOR DISASSEMBLY AND REASSEMBLY
Tool Type Remarks
Socket
Wrenchwith
6”Extension
10mm
13mm
19mm
Heater (1)
Motor(1),Balance(5),2holesofeachleftand
rightoftheshockabsorber1Pulleyhole
OpenEnd
wrench
10mm
13mm
19mm
Replaceablefortheboxdriver.
Sincetheboltrunsidlewhentheboxdriveris
used,usetheboxdriver17mm.
Vicepliers
Tooltoprotecttheidleandabrasionofthebolt
fortheboxdriver.
Others
(Driver, Nipper, Long
nose)
Generaltoolsfortheafterservice.