Samsung WF520AB Series - Shipping Bolt Removal and Location Selection

Removal and Reassembly _ 13
Part Figure Description
Separating the
Cover_Top and
Panel-Control
(Check Main-PCB
and Sub-PCB)
1. Removethe2hexagonscrews,whichareatthe
back,xingtheCOVER-TOP.
2. DisassembletheCOVER-TOPbyslidingit
backwardsandremovethe4screwsonthe
PANEL-CONTROL.
WatervalveNoiselter Main PCB
Sensor pressure
3. Withthetopcoverremovedyouwillnowhave
accesstoservicetheWaterpressuresensor,EMI
NoiseFilter,HotandColdWaterValves,Steam
ASSY,HoseDrawASSY,andMainPCBASSY.
4. PresstheSeparatebuttontoseparatetheASSY
DRAWER.
5. DisassembletheHOUSING-DRAWERfromthe
PANEL-CONTROL(Pushbackandthenpush
Housing-drawerupsidetoseparate)