Samsung WF520AB Series - Operating Your Samsung Washer; Loading Your Washer; Getting Started with a Wash Cycle

16 _ Removal and Reassembly
Part Figure Description
Disassembling and
Reassembling the
Door Part
1. Removethe2screwsholdingtheHINGE-DOOR
andtheFRAME-FRONT.
2. DisassembletheASSYDOORliftingitupslightly.
3. Removethe18screwsxingtheHOLDER-GLASS
(includingthe2bluescrewsholdingtheLEVER-
DOOR,includingthe3arrowscrewsholdingthe
HINGE-DOOR.)
4. Puttingandpressinghardaat-headscrewdriver
intothefurrowbetweenCOVER-DOORand
SUPPORT-HINGE.
5. Makingasemicirclewithscrewdriver.
(Disassemblethehooks)
6. DisassembletheHOLDER-GLASSfromCOVER-
DOORTaketheDOOR-GLASS,SUPPORT-
HINGE, HINGE-DOOR.
4 CheckPointsforTroubleshooting
• CheckthestatusofthescrewsholdingtheHinge(checkiftheyareloose).
Checkifthefrontandrearofthedoorandthehingepartarenotdamaged.