Samsung WP10 - Image Adjust

50

Contrast
You can change the contrast of the image.
1. Select [Contrast] by pressing the
Up/Down button.
2. Change the contrast by pressing the
Left/Right button.
3. Press the Shutter button to take an
image.
Image Adjust
Back Move
Contrast
Sharpness
Saturation
Image Adjust

Sharpness
You can adjust the sharpness of the
picture you are about to take.
You cannot check the sharpness effect
on the LCD monitor before you take a
picture, because this function is applied
only when the captured image is stored
on the memory.
1. Select [Sharpness] by pressing the Up/Down button.
2. Change the Sharpness by pressing the Left/Right button.
3. Press the Shutter button to take an image.

Saturation
You can change the saturation of the image.
1. Select [Saturation] by pressing the
Up/Down button.
2. Change the saturation by pressing
the Left/Right button.
3.
Press the Shutter button to take an
image.
Back Move
Contrast
Sharpness
Saturation
Image Adjust
Back Move
Contrast
Sharpness
Saturation
Image Adjust
Shooting ( )

When Image Adjust is set, Photo Style Selector function is not
available.

When Image Adjust is set, Face Detection mode is not available.