Samsung WW1 T Series - Before You Start; Initial Setup and Calibration

Disassembly and Reassembly _ 23
Part Figure Description
Frame Front
6. Removecoverlterbyhand.
7. PressthehooktoremoveGuidecoverlter
using(-)screwdriver.
 Becarefulnottobreakthehook.
8. PulltheGuideltertowardsyou.
9. LiftFramefrontuptodisassemble.
Cover-Back
Unfasten6(Dependingonthemodel,therecanbe
4screws)screwsthatholdthecoverbackinplace
with(+)screwdriver.
Removethebackcoverbyslidingitup.
(Whenassembling,slidethebackcoverdown.)
27 / 45 26 / 43 27 / 45