Samsung WW1 T Series - Page 31

Disassembly and Reassembly _ 27
 Reassembly
Part Figure Description
Door-Lock S/W
1. Assembletheterminals.(2ea)
 MakesuretheWireharnessarenotgetting
stuckinotherparts.
2. AssembletheCoverDoorSwitchbygently
pushingtheredboxpartwithhand.
 MakesuretheWireharnessarenotgetting
stuckinotherparts.
3. Assemblethescrewswith(+)screwdriver.(2ea)
4. AssemblethewirediaphragmandFrameFront.
Ifthewirediaphragmislooseafterassembly
orisnotcorrectlyassembledatthecorrect
position(5o'clockor7o'clock),waterleakage
may occur.
 How to force open the locked Door
Part Figure Description
Door-Lock S/W
Beforeyoustart,disassembleCoverToprst
1. PutyourhandtopresstheDoor-LockSwitch.
(Thelocationyouneedtopressisshowninthe
picturewitharrow)
31 / 45 30 / 43 31 / 45