English 29
Operations
Operations
Control panel
01 Cycle Selector Turn the dial to select a cycle.
02 Display
The display shows current cycle information and estimated time
remaining, or an information code when a problem occurs.
03 Temp. Press to change the water temperature for the current cycle.
04 Rinse
Press to change the rinse count for the current cycle. You can set the
rinse count to a max of 5.
05 Spin
Press to change the spinning speed for the current course.
• Rinse Hold
: The nal rinse process is suspended so that the
laundry remains in the water. To unload the laundry, run a drain or
spin process.
• No Spin : The drum does not spin after the nal drain process.
06 Options
Press to select an option from Intensive(
), Prewash( ), and
Intensive( ) + Prewash( ). Press again to deselect.
07 Bubble Soak
Press to activate/deactivate the Bubble Soak function. This function
helps remove a wide variety of stubborn stains.
• Bubble Soak helps remove a variety of stubborn stains.
• With Bubble Soak selected, laundry is thoroughly soaked in water
bubbles for effective washing.
• Bubble Soak is available with and adds up to 30 minutes (or 20
minutes) to 3 cycles: Cotton, Synthetics, and Baby Care.
WW10J6410CX_DC68-03505T-02_EN.indd 29 2016/2/25 15:03:40
To Next Page
Loading...
Need help?
General