English
Operations
English42
Child Lock
To prevent children or infants from accidentally starting or setting the washing machine, Child Lock locks
all buttons except for and .
1. Tap .
2. Turn the Navigation dial to select Child Lock, and then tap .
3. Tap to select On or Off.
- The Child Lock icon turns on when the function is on.
NOTE
• When Child Lock is on, all buttons are disabled except for and . The washing machine door also
locks.
• Tapping a button while Child Lock is on triggers an alarm with the “Child Lock On” message.
• You cannot open the door after a wash cycle when the Child Lock is on. Turn the function off before
opening the door to take out the laundry.
Settings
Using Settings
1. Tap and hold for 3 seconds.
2. Turn the Navigation dial and select the desired system setting, and then tap .
3. Tap to change or run the selected setting.
NOTE
To return to the main screen, tap again or turn the Navigation dial to select Back and tap .
Water Hardness
Set the water hardness according to your region. The detergent concentration level adjusts automatically
according to the water hardness setting.
1. Tap and hold for 3 seconds.
2. Turn the Navigation dial to select Water Hardness, and then tap .
3. Tap to select the desired setting.
• The default setting for Water Hardness is Med.. Changing the setting adjusts the amount of detergent
dose.
Water Hardness setting Soft Med. Hard
Amount of detergent
dose
Decreased Normal Increased
Untitled-1 42 2022-10-05 12:14:48
To Next Page
Loading...
