Samsung WW11BB944DGM - Page 44

English
Operations
English44
Pump Clean
You can use this function to clean detergent or softener residue buildup in the pump. Use this function
after you empty and clean the dispenser.
1. Tap and hold for 3 seconds.
2. Fill the water up to the MAX line.
3. Turn the Navigation dial to select Pump Clean, and then tap .
4. Tap to select the desired dispenser pump(s) you want to clean.
- You can select from Dispenser , dispenser , or Dispenser / .
5. Tap to start cleaning.
- The water will drain out from the dispenser.
NOTE
• Use this function before you change the type of cleaning agent (detergent or softener) used in the
dispenser.
• You can use this function to clean detergent or softener residue buildup in the dispenser pump.
• Empty and clean the dispenser before using this function. Otherwise, bubbles may generate inside the
drum.
AI Pattern
This function saves frequently used cycles and settings. When you turn the function on, the washing
machine remembers the cycles you use most and their settings (Temp., Rinse, Spin) and displays them in
frequency order.
1. Tap and hold for 3 seconds.
2. Turn the Navigation dial to select AI Pattern, and then tap .
3. Tap to select On or Off.
- The default setting is On. Set it to Off if you do not want to use this function.
- When you turn off the function, all the saved data resets.
Sound
You can turn on or off the sound from the washer.
1. Tap and hold for 3 seconds.
2. Turn the Navigation dial to select Sound, and then tap .
3. Tap to select On or Off.
- The default setting is On.
NOTE
The setting remains unchanged even if you restart the washing machine.
Untitled-1 44 2022-10-05  12:14:48