English 15
Installation
STEP 6 Power on
Plug the power cord into a wall socket protected by a fuse or circuit breaker. Then, tap and hold for 3 seconds to
turn on the washing machine.
NOTE
• Before doing your laundry for the first time, you must run a complete wash cycle without any items in the drum.
• If the display does not respond to control inputs. Remove the sticker.
Run Calibration
• Initial setup includes the calibration process which comes after the language selection. You must proceed
calibration before using the washing machine.
• Empty the drum, and then tap to start calibration.
• When calibration is complete, power turns off and then turns on automatically.
• If you want to proceed calibration again, tap and hold to enter the system function and select Calibration.
Manual dispenser
Prewash
compartment
Main-wash
compartment
Softener
compartment
A
1. Prewash compartment: Add prewash detergent.
2. Main-wash compartment: Add main-wash
detergent, water softener, soaking detergent,
bleach, and/or stain removers.
3. Softener compartment: Put in additives such as
fabric softener. Do not exceed the max line (A).
CAUTION
The washing machine stops operating if you open the detergent drawer while water is being supplied.
DC68-04204H-08_IB_U-PJT_WASHER-MD_SimpleUX_EN.indd 15 2023-06-14 11:57:41
To Next Page
Loading...
