Samsung WW70T4040EE User Manual

30 _ Troubleshooting
4. TROUBLESHOOTING
4-1. INFORMATION CODE
► When an abnormal condition occurs, melody sounds and displays Info. code indications as shown in the following Info. codes
are shown until the status has cleared.
No. Information Type
Information
Code
Causes Corrective Actions
1 WaterLevel 1C
- Thepartofthehosewherethewaterlevelsensoris
locatedisdamaged(punctured).
- Thehoseiscloggedwithforeignmaterial.
- Thehoseisfolded.
- Toomuchlubricanthasbeenappliedtotheinsertion
partoftheairhose.
- Hoseengagementerror(disengaged)
- Partfault(Faultyinternalsoldering)
- Thewaterlevelsensorterminalisdisengaged.
- MainPBAfault
•Waterlevelsensorfault.
•Thewaterlevelsensorterminalis
disengaged.
•Thepartofthehosewherethe
waterlevelsensorfolded.
•MainPCBfault.
2 Motor
3C
- ThePBAconnectorterminalisnotconnected.
- Themotorspinnetisnotengaged.
- Themotor’sinternalcoilisdamaged(short-circuited
orcut)
- Foreignmaterial(ascrew)hasenteredthemotor.
•Washingmotorfault.
•CheckWashingmotorconnector.
•Washingmotorrotor/statorfault.
•MainPCBfault.
3C1
- Motoroverloadedduetotoomuchlaundry(Non
sensing)
- PBAfault
3C2
- ThemotordrivingerrorfromthePBAisweak:
Unstablerelayoperation,etc.
3C3
- TheIPMterminalofthemainPBAisnotconnected.
- TheDDmotorcoverisoutofplace.
3C4
- ThePCBhousingterminalisnotconnected.
- PBAfault
- DDmotorfault
3 WaterSupply
4C
- Foreignmaterialisenteringthewatersupplyvalve.
- Thewatersupplyvalveterminalisnotconnected.
(Wiredisconnected)
- Thewarmwaterandrinseconnectorsarewrongly
connectedtoeachother.
- ThisoccursifthePCBterminalfromthedrainhoseto
thedetergentdrawerisnotconnected.Checkwhether
thetransparenthoseisfoldedortorn.
- ThisoccursWaterpressureisweak,acertaintime
delay.
- ThisoccursWaterValvebyfreezinginwinterseason.
•Watersupplyvalvefault.
•MainPCBfault.
•Freezingbywinterseason.
4C2
- Thewatertemperatureissensedashigherthan50˚C
intheWoolorLingeriecourses
-
4 Drain 5C
- Thepumpmotorimpellerisdamagedinternally.
- Thewrongvoltage(220V→110V)issuppliedtothe
parts.
- Partfault
- Thisoccursduetofreezinginthewinterseason.
- Thedrainhoseisclogged.(Injectionerror,foreign
material)
- Cloggedwithforeignmaterial.
- Thewaterpumpterminalisnotconnected:rubber
band,bills,cotton,hairpins,coins.
•Drainpumpfault.
•Freezingbywinterseason.
•Checkinsideforeignmaterialof
drainpump.
•MainPCBfault.

Samsung WW70T4040EE Specifications

General

Child lock	Yes
Self-cleaning	-
Energy efficiency scale	A to G
Water consumption per cycle	45 L
Package width	890 mm
Package weight	67000 g
Commodity Classification Automated Tracking System (CCATS)	8450119000
Door hinge	Left
Control type	Buttons, Rotary
Display type	LED
Loading type	Front-load
Product color	White
Country of origin	Poland
Appliance placement	Freestanding
Drum capacity	7 kg
Cycle time (max)	208 min
Residual moisture	44 %
Spin-drying class	B
Maximum spin speed	1400 RPM
Noise level (spin)	72 dB
Noise level (wash)	- dB
Cycle time (quick washing program)	15 min

Weight and Dimensions

Depth	550 mm
Width	600 mm
Height	850 mm
Weight	65000 g