How to fix a Samsung Washer that will not start?
If your Samsung Washer won't start, ensure it's properly plugged in, the door is firmly closed, the water source taps are turned on, and you've pressed the Start/Pause button.
What to do if the Samsung Washer door is locked?
If your Samsung Washer door is locked shut or will not open, please note that the door will automatically open 3 minutes after the machine stops or the power turns off.
Why is my Samsung WW90H7600E vibrating so much?
If your Samsung Washer vibrates excessively or is too noisy, make sure it is on a level surface, adjusting the feet if necessary. Also, ensure the shipping bolts have been removed, the washer isn't touching anything, and the laundry load is balanced.
Why is my Samsung Washer not draining or spinning?
If your Samsung Washer isn't draining or spinning, straighten the drain hose to eliminate any kinks and ensure the debris filter is not clogged.
What does UE mean on my Samsung WW90H7600E Washer?
If your Samsung Washer is displaying a 'UE' error, it means the laundry load is unbalanced. Try redistributing the load. Note that washing only one item of clothing may also cause this error.
What does 4E mean on my Samsung WW90H7600E Washer?
If your Samsung Washer displays the '4E' error code, ensure the water source tap is turned on and check the water pressure. Additionally, clean the mesh filters of the water hose. Note that the washer drains for 3 minutes when this code appears, during which the Power button is inoperative.
Why Samsung Washer has no water?
If your Samsung Washer has no water or not enough water, fully turn on the water tap, ensure the water source hose isn't frozen, straighten any kinks in the water intake hoses, and clean the filter on the water intake hose.
What does 5E mean on a Samsung WW90H7600E Washer?
If your Samsung Washer displays '5E', clean the debris filter, ensure the drainage hose is installed correctly, and clean the water hose mesh filter.
What does Sd mean on my Samsung Washer?
If you see 'Sd' or 'Sud' on your Samsung Washer, it means too much foaming was detected and the washer is removing it. The normal cycle will resume once the removal is complete. This is normal operation.
Why is there detergent left in my Samsung Washer drawer?
If your Samsung Washer has detergent remaining in the detergent drawer after the wash cycle, ensure the washing machine is running with sufficient water pressure and that the detergent is added to the center of the detergent drawer.
Learn about essential safety instructions and guidelines for safe appliance operation.
Key precautions to minimize risks of fire, electric shock, and personal injury.
Essential warnings and safety advice specifically for the installation process.
Critical warnings for safe operation, including handling water leaks and gas leaks.
Warnings to follow during cleaning and maintenance procedures to avoid hazards.
Deciphers icons and signs used throughout the manual to indicate hazards.
A comprehensive, step-by-step guide for installing the washing machine.
Guide to perform initial settings, including the recommended calibration mode.
Advice on sorting laundry, checking pockets, using laundry nets, and pre-washing.
To Next Page
General