1. Press Power to turn on the washing machine.
2. Turn the Cycle Selector to select a course.
3. Change the cycle settings (Temp., Rinse, and Spin) as necessary.
4. To add an option, press Options. Use the button again to choose a preferred item.
5. The machine provides three easy to access buttons for Bubble Soak, Quick Wash, and
Delay End for your convenience. If you want to use one of these options, press the
corresponding button.
6. Press Start/Pause.
To change the cycle during operation
1. Press Start/Pause to stop operation.
2. Select a different cycle.
3. Press Start/Pause again to start the new cycle.
WW6000J(SEPM)-03580Q_EN (U.K).indd 31 2/9/2015 7:30:16 PM
To Next Page
Loading...
