Samsung WW85T554DAW - Before You Start; Initial Setup and Calibration

English
English 27
Before you start
Initial setup
• When you turn on the washing machine for the first time, the screen shows the initial setup process.
Follow the on-screen instructions to complete it.
• Initial setup will not repeat after you’ve completed it.
• The initial setup includes language selection, calibration, and a brief tutorial.
• Tap or turn the Navigation dial to skip to the next screen.
Run Calibration
• Initial setup includes the calibration process which comes after the language selection. You must
proceed calibration before using the washing machine.
• Empty the drum, and then tap and hold to start calibration.
• When calibration is complete, power turns off and then turns on automatically.
• If you want to proceed calibration again, tap and hold for 3 seconds to enter the system function and
select Calibration.
01 Language selection 02 Calibration 03 Welcome screen
Turn dial & Tap O
English(US)
English(AU)
Empty drum before
cailbrating
[Tap O to skip]
Welcome!
04 Tutorial
Let’s explore
your new washer!
[Tap O to skip]
Turn the dial
to explore cycles
[Tap O to skip]
Now hold
to start a cycle
[Tap O to skip]
Tap to see
additional functions
[Tap O to skip]
Try saving favorites
in My Cycles
All Done!
A washer that knows you!
U-PJT_WASHER-MD_SimpleUX_DC68-04220A-01_AU_EN(����+�7.5��).indd 27 2020/9/29 13:02:35