20 _ Disassembly and Reassembly
Reassembly
Part Figure Description
Assy Door
(Add door model)
ARKA TARAF
ÖN TARAF
1. Put the terminal through the biggest hole and
assemble 3 hooks as shown in the pictures.
2. Assemble the door with Frame Front by tting
the two hooks and assemble 2 screws holding
the Assy door with (+) screw driver.
3. Assemble 3 hooks using hand.
4. Assemble the terminal and the holders.
Make sure the Wire harness are not getting
stuck in other parts.
To Next Page
Loading...
