FeaturesandSpecications_6
2-3. OPTIONS SPECIFICATIONS
NO Unit Part Code Figure Description Qty
1 Bolt Spanner DC60-40146A
To remove the shipping bolts To
adjust the leveling leg
1
2 Assy Hose Water DC97-16921A To setup water supply.
Cold only 1,
Cold+Hot 2()
3
Hose Water
(Aqua-Stop)
DC62-00079A To setup water supply. 1(★)
4 Manual Users
DC68-04063A~Z
DC68-03853A~Z
To explain the product
operation and installation
1
5 Cap Fixer DC67-00307A To cover the holes 4
6 Hose Hanger DC62-10278A To secure the drain hose. 1
7 Guide Liquid DC61-03510A To use liquid detergent. 1(★)
8 Cap Fixer DC67-00208B
To cover the power
cord hole.
1
9
Anti-slip pads
(Sheet Paper)
DC63-01891A
To paste the bottom
of assy bolt.
2
10
Seal Washer DC62-00708C
To cover the shutter
hole.
1
Note
• (
★
) is supplied for specic models only among those without water supply hoses.
• Customer can purchase additional water supply and drain hoses from a service center.
• For built-in models, the spanner, water supply and drain hoses are not supplied. Both the water supply and drain hoses are
supplied during the installation.
• Seal Washer: To be pasted at Rat mesh opennings to avoid Rat entry inside Washing Machine.