24 _ Disassembly and Reassembly
Reassembly
Part Figure Description
Door-Lock S/W
1. Assemble the terminals.
Make sure the Wire harness are not getting
stuck in other parts.
3. Assemble the screws with (+) screw driver. (2ea)
4. Assemble the wire diaphragm and Frame Front.
If the wire diaphragm is loose after assembly
or is not correctly assembled at the correct
position (5 o'clock or 7 o'clock), water leakage
may occur.
How to force open the locked Door
Part Figure Description
Door-Lock S/W
Before you start, disassemble COVER FILTER rst.
1. Put your hand to pull the LEVER ACTUATOR (The
location you need to pull is shown in the picture
with arrow)
To Next Page
Loading...
