What to do if Samsung WW9 T Washer not filling with water?
If your Samsung Washer isn't filling with water, consider these possible solutions: * Fully open the water tap. * Ensure the door is properly closed. * Check that the water supply hose isn't frozen, kinked, or clogged. * Verify sufficient water pressure. * Make sure the cold and hot water taps are correctly connected. * Clean the mesh filter, as it may be clogged.
What to do if Samsung WW9 T Washer water supply is insufficient?
If your Samsung Washer isn't getting enough water, start by fully opening the water tap. Ensure the door is properly closed. Check that the water supply hose isn't frozen, kinked, or clogged. Make sure there's sufficient water pressure and that the cold and hot water taps are correctly connected. Finally, clean the mesh filter, as it may be clogged.
How to fix a Samsung WW9 T Washer that does not start?
If your Samsung Washer doesn't start, ensure it's properly plugged in, the door is fully closed, and the water taps are open. Press and hold the start button. Also, verify that Child Lock is deactivated and that no laundry is caught in the door. It's normal for the washer to make clicking noises and do a quick drain before filling. Check the fuse or circuit breaker and ensure proper power supply. For 'AddWash door is open' message, close the AddWash door properly and press and hold the start button.
Why is the water level wrong in my Samsung WW9 T?
If the water level in your Samsung Washer is incorrect, it could be due to several reasons. The hose where the water level sensor is located might be damaged, clogged with foreign material, or folded. Too much lubricant on the air hose insertion part, a hose engagement error, a part fault (like faulty internal soldering), a disengaged water level sensor terminal, or a main PBA fault can also cause this. These issues point to a water level sensor fault.
Why does my Samsung WW9 T overflow?
Your Samsung Washer may be overflowing due to a few potential issues. It could be that water is supplied continually because the water level detection isn't working, possibly due to a clogged drain hose or an injection error. Freezing or foreign material in the water supply valve can also cause continuous water supply. A faulty sensor, or a blocked or damaged pressure tube might also be responsible. All these scenarios can be related to a water level sensor fault.
Why is my Samsung WW9 T Washer vibrating excessively or making noise?
Excessive vibration or noise in your Samsung washer could be due to: * The washer not being on a level, solid floor. Adjust the levelling feet if needed. * Shipping bolts not being removed. * The washer touching another object. * An unbalanced laundry load. Redistribute the load if necessary. * Also, metal objects like coins can cause noise; remove them from the drum or filter case.
What to do if Samsung WW9 T leaks water?
If your Samsung washer is leaking water, ensure the door is properly closed and all hose connections are tight. Make sure the drain hose is correctly inserted and secured to the drain system, and avoid overloading the machine. Using high efficiency (HE) detergent can also help prevent oversudsing, which can cause leaks. Check the drain hose to ensure it is not placed on the floor or clogged.
What to do if Samsung WW9 T Washer does not drain and/or spin?
If your Samsung washer isn't draining or spinning, ensure the drain hose is straight and the debris filter isn't clogged. Close the door and tap and hold the start button. Make sure the drain hose isn't frozen or connected to a clogged drain system. Insufficient power can also cause this issue; the washer should resume normal operation once power is restored. Also, verify the drain hose is correctly positioned.
Why Samsung WW9 T Washer does not start?
Your Samsung washer might not start for several reasons. Ensure it's plugged in, the door is properly closed, and the water taps are open. Tap and hold the start button. Check that Child Lock isn't activated. The washer clicks and does a quick drain before filling. Also, check the fuse or circuit breaker and ensure proper power supply. If the “DDC” message appears, close the AddWash door properly and tap and hold the start button again.
Why won't my Samsung WW9 T Washer start?
If your Samsung Washer doesn't start, first ensure it's properly plugged in and the door is completely closed. Also, check that the water taps are open and Child Lock is not activated. You may need to tap and hold to start the washing machine. Before filling, the machine clicks and does a quick drain to check the door lock. Verify the fuse or circuit breaker and ensure proper power supply. If a 'Low voltage detected' message appears, check the power cord. Make sure no laundry is caught in the door. For AddWash models, close the AddWash door properly and tap and hold to start or resume operation.
General| Capacity | 9 kg |
|---|---|
| Spin Speed | 1400 rpm |
| AI Wash | Yes |
| Auto Dispense | Yes |
| AddWash | Yes |
| Hygiene Steam | Yes |
| WiFi Embedded | Yes |
| Color | White |
| Inverter Motor | Yes |
| Digital Inverter Technology | Yes |
| Eco Bubble Technology | Yes |
| Dimensions (HxWxD) | 850 x 600 x 550 mm |
Essential guidance on understanding and adhering to safety warnings for appliance operation.
Explains the meaning of icons and signs used in the manual to indicate hazards.
Lists critical precautions to reduce risks of fire, electric shock, and injury during use.
Highlights essential safety measures for the proper and safe installation of the appliance.
Details severe risks and precautions related to operating the washing machine safely.
Details prerequisites for safe and optimal operation, covering location, electrical, water, drain, and flooring.
Provides a detailed, sequential guide for physically installing the washing machine.
Guides through the first-time setup, including language selection and calibration.
Explains the function of each button and display element on the washing machine's control panel.
Step-by-step instructions on how to select and start a wash cycle.
Guide to identify and resolve common operational issues and errors.
Explains error codes displayed on the machine and suggests troubleshooting steps.
To Next Page
