How to fix a Samsung WW9*K5 that does not start?
If your Samsung Washer doesn't start, ensure it's plugged in, the door is properly closed, and the water taps are open. Press the Start/Pause button. Also, check if Child Lock is activated. Note that the washer makes clicking noises and does a quick drain before filling. Finally, check the fuse or reset the circuit breaker.
What to do if my Samsung WW9*K5 Washer does not drain and/or spin?
If your Samsung Washer isn't draining or spinning, make sure the drain hose is straightened and not clogged. Check the debris filter and ensure it's not clogged. Close the door and press Start/Pause. Also, confirm the drain hose isn't frozen and is connected to an unclogged drain system. If there's insufficient power, the washer will temporarily halt draining or spinning until sufficient power is restored.
Why is my Samsung WW9*K5 Washer leaking water?
If your Samsung Washer is leaking water, ensure the door is properly closed and all hose connections are tight. Make sure the end of the drain hose is correctly inserted and secured to the drain system. Avoid overloading the washer and use high-efficiency (HE) detergent to prevent excessive suds.
What to do if the door of my Samsung WW9*K5 does not open?
If the door of your Samsung Washer won't open, press Start/Pause to stop the washing machine. Allow a few moments for the door lock mechanism to disengage, as the door will not open until 3 minutes after the washer has stopped or the power is turned off. Ensure all water in the drum is drained and the door lock light is off.
Why is my Samsung WW9*K5 Washer producing excessive suds?
If you observe excessive suds in your Samsung Washer, use the recommended types of detergent and high-efficiency (HE) detergent to prevent oversudsing. Reduce the detergent amount for soft water, small loads, or lightly soiled loads. Non-HE detergent is not recommended.
Why is the water supply insufficient in my Samsung WW9*K5 Washer?
If the water supply to your Samsung Washer is insufficient or nonexistent, fully open the water tap. Ensure the door is properly closed and the water supply hose isn't frozen, kinked, or clogged. Also, ensure there is sufficient water pressure.
Why is my laundry load still wet after a Samsung WW9*K5 cycle?
If your laundry load is still wet after a cycle in your Samsung Washer, use the High or Extra High spin speed. Use high-efficiency (HE) detergent to reduce oversudsing. Note that small loads may become unbalanced and not spin completely. Also, ensure the drain hose is not kinked or clogged.
Why does my Samsung Washer keep stopping?
If your Samsung Washer stops, ensure the power cord is plugged into a live electrical outlet and check the fuse or reset the circuit breaker. Close the door and press Start/Pause. Note that the washer makes clicking noises and does a quick drain before filling. There may be a pause or soak period in the cycle. Ensure the mesh filter of the water supply hose is not clogged. If there is insufficient power, the washer will temporarily halt until sufficient power is restored.
Why does detergent remain in the drawer of my Samsung Washer after a cycle?
If detergent remains in the detergent drawer of your Samsung Washer after a cycle, ensure the washer is running with sufficient water pressure. Make sure the detergent is added to the center of the drawer and the rinse cap is inserted properly. If using granular detergent, ensure the detergent selector is in the upper position. Remove the rinse cap and clean the detergent drawer.
Why is my Samsung WW9*K5 Washer vibrating so much and making noise?
If your Samsung Washer is vibrating excessively or making unusual noises, ensure it's installed on a level, solid floor that isn't slippery; use leveling feet if needed. Remove the shipping bolts and make sure the washer isn't touching anything. Balance the laundry load. Remember that the motor and metal objects like coins or metal-decorated clothes can cause noise during normal operation.
Covers warnings, precautions for safe use, children's safety, and cord safety.
Details critical warnings and cautions regarding electrical supply, grounding, and installation environment.
Lists included parts and specifies electrical, water supply, and drain requirements for installation.
Step-by-step guide for selecting a location, removing shipping bolts, adjusting feet, connecting hoses, and powering on.
Lists common problems and suggested actions to resolve them before contacting service.
Explains various error codes displayed by the machine and their corresponding solutions.
General| Capacity | 9 kg |
|---|---|
| Spin Speed | 1400 rpm |
| AddWash | Yes |
| EcoBubble Technology | Yes |
| Digital Inverter Motor | Yes |
| Delay Start | Yes |
| Child Lock | Yes |
| Type | Front Load |
| Energy Efficiency Class | A+++ |
| Dimensions (HxWxD) | 85 cm x 60 cm x 55 cm |
| Color | White |
| Quick Wash | Yes |
To Next Page