Samsung WW9*K5 series - Operations; Control Panel

Operations
English 31
Operations
Control panel
WW9*K5*****
01
02
03 04 05 06
07
08
09
11
10
WW8*K5*****, WW7*K5*****
01
02
03 04 05 06
07
08
09
11
10
01 Cycle Selector Turn the dial to select a cycle.
02 Display
The display shows current cycle information and estimated time
remaining, or an information code when a problem occurs.
03 Temp. Press to change the water temperature for the current cycle.
04 Rinse
Press to change the rinse count for the current cycle. You can set
the rinse count to a max of 5, depending on the cycle.
05 Spin
Press to change the spinning speed for the current cycle.
• Rinse Hold
: The nal rinse process is suspended so that
the laundry remains in the water. To unload the laundry, run a
drain or spin process.
• No Spin : The drum does not spin after the nal drain process.
06 Options
Press to select an option from Intensive, Pre Wash, and Bubble
Soak. Press again to deselect.
07 Bubble Soak
Press to activate/deactivate the Bubble Soak function. This
function helps remove a wide variety of stubborn stains.
WW5500K_EN_151229.indd 31 2015-12-29  6:00:44