Why Samsung Washer has odours?
Odors in your Samsung washer can arise from: * Excessive suds collecting in recesses. * Run cleansing cycles to sanitise periodically. * Cleaning the door seal (diaphragm). * Drying the washing machine interior after each cycle.
What to do if my Samsung WW90DG6U85LK does not drain and/or spin?
If your Samsung washer isn't draining or spinning, try the following: * Ensure the drain hose is fully straightened to the drain system. * Check and clean the debris filter, as it may be clogged. * Make sure the door is closed properly and press and hold the start button. * Verify that the drain hose isn't frozen or clogged, and is correctly connected to the drain system. * If power supply is insufficient, the washer will temporarily not drain or spin. As soon as the washer regains sufficient power, it will operate normally.
Why is my Samsung Washer leaking water?
If your Samsung washer is leaking water, consider the following: * Ensure the door is properly closed. * Make sure all hose connections are tight. * Verify the drain hose is correctly inserted and secured to the drain system. * Avoid overloading the machine. * Use high efficiency (HE) detergent to prevent excessive suds. * Check the drain hose for clogs and ensure it's not placed on the floor. * Inspect for obstructions between the door and the diaphragm; remove any to prevent leaks or damage.
What to do if Samsung WW90DG6U85LK Washer door does not open?
If the door of your Samsung washer won't open, try these steps: * Press and hold the start/stop button to stop the washing machine. * Allow a few moments for the door lock mechanism to disengage. * Note that the door will not open until 3 minutes after the washer has stopped or the power has been turned off. * Ensure all the water in the drum has drained. If water remains, drain the drum manually.
What to do if Samsung WW90DG6U85LK Washer shows 'Redistribute unbalanced load and restart'?
The 'Redistribute unbalanced load and restart' message on your Samsung washer indicates that spinning is not working. To resolve this: * Ensure laundry is spread out evenly inside the drum. * Make sure the washing machine is placed on a flat, stable surface. * Redistribute the load, especially if washing only one item of clothing.
Why Samsung WW90DG6U85LK water supply is insufficient, or no water is supplied?
If your Samsung washer's water supply is insufficient or non-existent: * Fully open the water tap. * Make sure the door is properly closed. * Ensure the water supply hose is not frozen, kinked, or clogged. * Verify there is sufficient water pressure. * Confirm that the cold and hot water taps are properly connected. * Clean the mesh filter, as it may be clogged.
What to do if Samsung WW90DG6U85LK Washer shows 'Please connect the hot/cold water hose connection correctly'?
If your Samsung washer displays the message 'Please connect the hot/cold water hose connection correctly', make sure the cold water supply hose is firmly connected to the cold water tap. If it is connected to the hot water tap, the laundry may be deformed with some cycles.
Why Samsung Washer has excessive suds?
Excessive suds in your Samsung washer can be due to: * Using non-recommended types of detergent. * Not using high efficiency (HE) detergent. * Using too much detergent for soft water, small loads, or lightly soiled loads.
What to do if Samsung WW90DG6U85LK Washer stops?
If your Samsung washer stops: * Plug the power cord into a live electrical outlet. * Check the fuse or reset the circuit breaker. * Close the door, and press and hold to start the washing machine. For your safety, the washing machine will not tumble or spin unless the door is closed. * There may be a pause or soak period in the cycle. Wait briefly, and the washing machine may start. * Make sure the mesh filter of the water supply hose at the water taps is not clogged. Periodically clean the mesh filter. * If the washing machine is not supplied with sufficient power, the washing machine will temporarily not drain or spin. As soon as the washing machine regains sufficient power, it will operate normally.
What to do if Samsung WW90DG6U85LK Washer shows 'Check water supply faucets and restart'?
If your Samsung washer displays the message 'Check water supply faucets and restart' because water is not supplied: * Ensure the water taps are fully open. * Check that the water hoses are not clogged. * Verify the water taps are not frozen. * Make sure the washing machine is running with sufficient water pressure. * Confirm that the cold and hot water taps are properly connected. * Clean the mesh filter, as it may be clogged.
General| Model | WW90DG6U85LK |
|---|---|
| Type | Front Load Washer |
| Capacity | 9 kg |
| Spin Speed | 1400 RPM |
| Energy Efficiency Class | A+++ |
| Dimensions (H x W x D) | 85 x 60 x 55 cm |
| AI Wash | Yes |
| Quick Wash | Yes |
| Noise Level (Spin) | 72 dB |
| Color | White |
| Digital Inverter Motor | Yes |
| Eco Bubble Technology | Yes |
| Delay Start | Yes |
| Child Lock | Yes |
Key information and guidelines for understanding safety warnings and instructions.
Essential safety measures to reduce risks of fire, electric shock, or injury.
Warnings related to proper installation procedures to prevent hazards.
Severe warnings for users regarding unsafe practices during appliance operation.
Essential requirements for electrical supply, grounding, water supply, and drain.
Detailed instructions for setting up the washing machine from unpacking to initial placement.
Instructions for safely removing shipping bolts before operating the machine.
Guide on how to adjust the feet to ensure the machine is level and stable.
Guide to the first-time setup process including language selection and drum calibration.
Step-by-step guide to selecting and starting a wash cycle.
Detailed descriptions of available wash cycles, their purpose, and maximum load capacity.
Guide to connecting to the SmartThings app and using remote control features.
Steps to drain water from the drum in case of a power failure.
Table of common problems and suggested actions to resolve them.
Solutions for problems like noise, no drain/spin, and door not opening.
List of error codes and their meanings.
Troubleshooting for specific error codes related to sensors and controls.
Troubleshooting for the main door lock/unlock error code.
To Next Page