What to do if Samsung WW90DG6U85LK Washer load is wet at the end of a cycle?
If your Samsung washer leaves the load wet after a cycle, consider these points: * Use the High or Extra High spin speed settings. * Use high efficiency (HE) detergent to reduce oversudsing. * Be aware that small loads (one or two items) may become unbalanced and not spin completely. * Check the drain hose for kinks or clogs.
Why Samsung WW90DG6U85LK Washer has excessive vibrations or makes noise?
Excessive vibration or noise in your Samsung washer can be due to several factors: * Ensure the washer is on a level, solid, and non-slippery floor. Adjust the leveling feet if needed. * Confirm that the shipping bolts have been removed. * Make sure the washer isn't touching any other objects. * Ensure the laundry load is balanced. * Note that the motor can cause noise during normal operation. * Be aware that metal objects like coins can cause noise; remove them from the drum or filter case after washing. * Redistribute the load if only one item of clothing is being washed.
Why Samsung WW90DG6U85LK water supply is insufficient, or no water is supplied?
If your Samsung washer's water supply is insufficient or non-existent: * Fully open the water tap. * Make sure the door is properly closed. * Ensure the water supply hose is not frozen, kinked, or clogged. * Verify there is sufficient water pressure. * Confirm that the cold and hot water taps are properly connected. * Clean the mesh filter, as it may be clogged.
What to do if Samsung WW90DG6U85LK Washer shows 'Redistribute unbalanced load and restart'?
The 'Redistribute unbalanced load and restart' message on your Samsung washer indicates that spinning is not working. To resolve this: * Ensure laundry is spread out evenly inside the drum. * Make sure the washing machine is placed on a flat, stable surface. * Redistribute the load, especially if washing only one item of clothing.
What to do if Samsung WW90DG6U85LK Washer door does not open?
If the door of your Samsung washer won't open, try these steps: * Press and hold the start/stop button to stop the washing machine. * Allow a few moments for the door lock mechanism to disengage. * Note that the door will not open until 3 minutes after the washer has stopped or the power has been turned off. * Ensure all the water in the drum has drained. If water remains, drain the drum manually.
Why is my Samsung Washer leaking water?
If your Samsung washer is leaking water, consider the following: * Ensure the door is properly closed. * Make sure all hose connections are tight. * Verify the drain hose is correctly inserted and secured to the drain system. * Avoid overloading the machine. * Use high efficiency (HE) detergent to prevent excessive suds. * Check the drain hose for clogs and ensure it's not placed on the floor. * Inspect for obstructions between the door and the diaphragm; remove any to prevent leaks or damage.
What to do if my Samsung WW90DG6U85LK does not drain and/or spin?
If your Samsung washer isn't draining or spinning, try the following: * Ensure the drain hose is fully straightened to the drain system. * Check and clean the debris filter, as it may be clogged. * Make sure the door is closed properly and press and hold the start button. * Verify that the drain hose isn't frozen or clogged, and is correctly connected to the drain system. * If power supply is insufficient, the washer will temporarily not drain or spin. As soon as the washer regains sufficient power, it will operate normally.
General| Model | WW90DG6U85LK |
|---|---|
| Type | Front Load Washer |
| Capacity | 9 kg |
| Spin Speed | 1400 RPM |
| Energy Efficiency Class | A+++ |
| Dimensions (H x W x D) | 85 x 60 x 55 cm |
| AI Wash | Yes |
| Quick Wash | Yes |
| Noise Level (Spin) | 72 dB |
| Color | White |
| Digital Inverter Motor | Yes |
| Eco Bubble Technology | Yes |
| Delay Start | Yes |
| Child Lock | Yes |
Key information and guidelines for understanding safety warnings and instructions.
Essential safety measures to reduce risks of fire, electric shock, or injury.
Warnings related to proper installation procedures to prevent hazards.
Severe warnings for users regarding unsafe practices during appliance operation.
Essential requirements for electrical supply, grounding, water supply, and drain.
Detailed instructions for setting up the washing machine from unpacking to initial placement.
Instructions for safely removing shipping bolts before operating the machine.
Guide on how to adjust the feet to ensure the machine is level and stable.
Guide to the first-time setup process including language selection and drum calibration.
Step-by-step guide to selecting and starting a wash cycle.
Detailed descriptions of available wash cycles, their purpose, and maximum load capacity.
Guide to connecting to the SmartThings app and using remote control features.
Steps to drain water from the drum in case of a power failure.
Table of common problems and suggested actions to resolve them.
Solutions for problems like noise, no drain/spin, and door not opening.
List of error codes and their meanings.
Troubleshooting for specific error codes related to sensors and controls.
Troubleshooting for the main door lock/unlock error code.
To Next Page