How to get rid of odors in my Samsung WW9*K5?
If your Samsung Washer has odors, excessive suds may be collecting in recesses. Run cleansing cycles periodically. Clean the door seal (diaphragm) and dry the washing machine interior after each cycle.
Why does my Samsung WW9*K5 Washer fill with the wrong water temperature?
If your Samsung Washer fills with the wrong water temperature, fully open both taps and make sure the temperature selection is correct. Verify that the hoses are connected to the correct taps and flush the water lines. Ensure the water heater is set to supply a minimum 120 °F (49 °C) hot water at the tap and check its capacity and recovery rate. Disconnect the hoses and clean the mesh filter if it's clogged. The water temperature may change as the automatic temperature control feature checks incoming water temperature. You may notice just hot and/or just cold water going through the dispenser when cold or warm temperatures are selected; this is normal for the automatic temperature control feature.
Why are there no bubbles in my Samsung Bubbleshot Washer?
If no bubbles are seen in your Samsung Washer (Bubbleshot models only), overloading may screen bubbles or severely contaminated laundry may not generate bubbles.
General| Capacity | 9 kg |
|---|---|
| Spin Speed | 1400 rpm |
| AddWash | Yes |
| EcoBubble Technology | Yes |
| Digital Inverter Motor | Yes |
| Delay Start | Yes |
| Child Lock | Yes |
| Type | Front Load |
| Energy Efficiency Class | A+++ |
| Dimensions (HxWxD) | 85 cm x 60 cm x 55 cm |
| Color | White |
| Quick Wash | Yes |
Covers warnings, precautions for safe use, children's safety, and cord safety.
Details critical warnings and cautions regarding electrical supply, grounding, and installation environment.
Lists included parts and specifies electrical, water supply, and drain requirements for installation.
Step-by-step guide for selecting a location, removing shipping bolts, adjusting feet, connecting hoses, and powering on.
Lists common problems and suggested actions to resolve them before contacting service.
Explains various error codes displayed by the machine and their corresponding solutions.
To Next Page