26 English
Installation
Installation
For models with an additional hot water inlet:
1. Connect the red end of the hot water hose
to the hot water inlet on the back of the
machine.
2. Connect the other end of the hot water hose
to the hot water tap.
Aqua hose (applicable models only)
The aqua hose alerts users of a risk of water leaks.
It senses the water flow and turns red on the
centre indicator (A) in case of a leak.
NOTE
The end of the aqua stop hose must be fitted to the water tap and not the machine.
WW3000TM_FA_8C104-000708_EN.indd 26WW3000TM_FA_8C104-000708_EN.indd 26 2021-04-07 4:05:342021-04-07 4:05:34
To Next Page
Loading...
