Samsung WW90M6 - Page 18

16 _ Disassembly and Reassembly
Part Figure Description
Cover-Back
• Unfastenthe4screwsthatholdtheback
coverinplace.Removethebackcoverby
slidingitdown.(Whenassembling,slidethe
backcoverup.)
Belt
2
1
2
1
1. RemovetheCoverback.
2. Separatethebeltandthenassemblyit.
3. Checkifthebeltpositionisatthecenterof
thePulley.
 AssemblingthebeltPlacethebelt
aroundtheMotor-Pulley(①)andthen
overthePulley(②).
WW22N6850NX-A2_SM.indb 16 2018/2/1 17:15:35