Samsung WW90M6 - Page 23

Disassembly and Reassembly _ 21
Part Figure Description
Drain Pump
5. DisconnecttheterminalandHolder.
6. ReleasetheBANDRING(3EA)and
removetheHOSE(3EA).
7. PushtheTUBinwardslightlytoremovethe
PUMP.
Drain Pump
 Pumpwireharnessisconnectedtomain
wireharness.
4 Check Points for Troubleshooting
1.SeparatetheDrainFilterandcheckifanyaliensubstancesareinsidethepump
(e.g.coins,buttons..,etc.)→Removetheseiffound.
2.Checkifthewiredrivingthepumphascomeloose→Taketherelevantcountermeasure
if necessary.
3.Whenwaterleaks,checktheassemblystatusoftheClampHose,andCapDrain→
Taketherelevantcountermeasureifnecessary.Turntheltercounterclockwiseto
removetheremainingwater.
WW22N6850NX-A2_SM.indb 21 2018/2/1 17:15:40