Samsung Xpress CLX-419x series - Scanning and Sending an Email

Scan features
316
4. Special Features
• If the authentication method of SMTP server is POP3 before SMTP, put a
check mark of SMTP Requires POP Before SMTP Authentication.
• Enter the IP address and port number.
Scanning and sending an email
1
Place a single document face down on the document glass, or load the
documents face up into the document feeder (see "Loading originals" on
page 61).
2
Select (scan) > Scan To Email on the control panel.
Or select Scan > Send Email on the touch screen.
3
Enter the login name and password if you configured on SyncThru™ Web
Service (see "Using SyncThru™ Web Service" on page 340).
4
Enter the sender’s and recipient’s email address.
You can send an email to yourself by activating the Auto Send To Self
option in the Settings > Scan > Scan To E-mail on SyncThru™ Web Service.
5
Enter an email subject and press OK.
6
Select the file format to scan, and press OK.
7
Enter the SMTP server login name and password.
8
The machine begins scanning and then sends the email.