Media and tray
54
2. Menu Overview and Basic Setup
2
Load the paper.
3
Squeeze the multi-purpose (or manual feeder) tray paper width guides
and adjust them to the width of the paper. Do not force them too much,
or the paper will bent resulting in a paper jam or skew.
• When printing the special media, you must follow the loading guideline
(See "Printing on special media" on page 55).
• When papers overlap when printing using Multi-purpose tray, open tray
1 and remove overlapping papers then try printing again.
4
When you print a document, set the paper type and size for the multi-
purpose (or manual feeder) tray.
For information about setting the paper type and size on the control
panel (see "Setting the paper size and type" on page 59).
CLX-419x series
C186x series
CLX-626x series
To Next Page
Loading...
