EasyManua.ls Logo

S&C 5800 Series - Safety Information; Understanding Safety-Alert Messages; Following Safety Instructions; Replacement Instructions and Labels

S&C 5800 Series
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
S&C Instruction Sheet 1041-550 3
Safety Information
Understanding
Safety-Alert Messages
Following
Safety Instructions
Replacement
Instructions and Labels
There are several types of safety-alert messages which may appear throughout this
instruction sheet as well as on labels attached to the
5800 Series Control. Familiarize
yourself with these types of messages and the importance of the various signal words,
as explained below
.
Ç
DANGER
“DANGER” identifies the most serious and immediate hazards which will likely
result in serious personal injury or death if instructions, including recommended
precautions, are not followed.
Ç
WARNING
“WARNING” identifies hazards or unsafe practices which can result in serious
personal injury or death if instructions, including recommended precautions, are
not followed.
Ç
CAUTION
“CAUTION” identifies hazards or unsafe practices which can result in minor per-
sonal injury or product or property damage if instructions, including recommended
precautions, are not followed.
NOTICE
“NOTICE” identifies important procedures or requirements that can result in product
or property damage if instructions are not followed.
If you do not understand any portion of this instruction sheet and need assistance,
contact your nearest S&C Sales Office or S&C Authorized Distributor. Their tele-
phone numbers are listed on S&C’s website www.sandc.com. Or call S&C Headquarters
at (773) 338-1000; in Canada, call S&C Electric Canada Ltd. at (416) 249-9171.
NOTICE
Read this instruction sheet thoroughly and carefully
before installing or operating your S&C 5800 Series
Automatic Switch Control.
If you need additional copies of this instruction sheet, contact your nearest S&C Sales
Office, S&C Authorized Distributor, S&C Headquarters, or S&C Electric Canada Ltd.
It is important that any missing, damaged, or faded labels on the equipment be replaced
immediately. Replacement labels are available by contacting your nearest S&C Sales Office,
S&C Authorized Distributor, S&C Headquarters, or S&C Electric Canada Ltd.

Related product manuals