SanDisk Fuze - Basic Operation and Connectivity; Power Switch and Thumbwheel Usage

3
Basic Usage
10
This chapter provides you the basic usage instructions
for your Sansa
®
Fuze
TM
player.
Basic Usage
Power Switch
The power switch is used to turn the player on or off as well as resetting it.
Power On
Slide the Power Switch up to turn on the player. The Blue Ring will light up and
the Main Menu will appear after it has been booted up.
Power Off
Slide the Power Switch up and hold it for about 2 seconds to turn off the player.
NOTE: To prevent accidental power on, move the HOLD switch to the locked
position.
Reset
To reset your player, slide the Power Switch up and hold it for approximately 10
seconds.
Thumbwheel
The thumbwheel can be used to navigate the player as well as control the volume and rate
tracks. Turn the wheel clockwise to scroll down through menu items or to increase the
volume during playback. Turn the wheel counterclockwise to scroll up through menu
items or decrease the volume during playback.