SanDisk Sansa e200 - Playback Screen; Battery

Sansa
®
e200 Overview
8
Playback Screen
1 Track Number Displays the current track number and the total
number of tracks
2 Artist Name Displays the artist name
3 Song Displays the name of the song
4 Track Timer Display the timer of the current track
5 Repeat Indicates that the repeat function is enabled
6 Album Name Displays the album name
7 Play/Pause Displays the music or recording files playback status
8 Track Length Displays the remaining timer of the current track
9 Battery Displays the battery status
Battery
The Sansa e200 player comes with a replaceable and rechargeable lithium ion
battery. To use the player for the very first time, remember to fully charge the Li-
ion battery. You can charge your Sansa through the USB port of your computer, a
car adapter (not included) USB port, or AC adapter (not included) USB port.
Level Indicator
Battery is Half Full Battery is Low
Charging
To charge the battery, please follow these steps:
1. Connect the smaller end of the USB cable into an available USB port
on the computer.
2. Connect the larger end of the USB cable into the dock connector of the
player.
3. The computer must be on for most USB ports to charge your battery.
Your Sansa will show connected and the yellow charging indicator will