SanDisk Sansa e200 - Basic Usage; Power Button; Power on; Power off

3
Basic Usage
10
This chapter provides you the basic usage instructions
for your Sansa
®
e200 player.
Basic Usage
Power Button
The power button is used to power on or off, putting the Sansa
®
e200 player in
standby mode as well as resetting it. For initial power-up you must unlocked the
controls by moving the HOLD switch to the un-locked position (No Orange Color
visible).
Power On
Press the Power Button once to turn on the Sansa e200 device. The
Thumbwheel will light up and the Main Menu will appear after it has been
booted up.
Power Off
To power down the Sansa e200 player, press and hold the Power Button for
approximately 2 seconds or until Goodbye is displayed.
NOTE: To prevent accidental power on, move the HOLD switch to the
locked position.
Reset
If the Sansa e200 player freezes up, press the Power Button for
approximately 15 seconds. This is like a power down of the device. Once
you perform the reset, the adjustments you made during the last operation
will be gone.
Thumbwheel
Turn the wheel clockwise to scroll down though menu items rapidly or to increase
the volume during playback.