Sandstrom SAC07C15E User Manual

GB
27
General Operation
Adjusting the Louvre
You can adjust the louvre up or down manually.
Setting the Auto On/O Time
You can set the unit’s auto on/o time.
On the UNIT:
When the unit is switched on:
1) Press TIMER. The OFF LED will light up.
2) Input the auto o time by pressing
/v. Press TIMER to conrm. The ON LED will light up.
3) Input the auto on time by pressing
/v. Press TIMER to conrm. Both ON/OFF LEDs will
light up. The unit is now programmed to auto on/o.
When the unit is switched o:
1) Press TIMER. The ON LED will light up.
2) Input the auto on time by pressing
/v. Press TIMER to conrm. The OFF LED will light up.
3) Input the auto o time by pressing
/v. Press TIMER to conrm. Both ON/OFF LEDs will
light up. The unit is now programmed to auto on/o.
On the REMOTE CONTROL:
1. Press TIMER ON repeatedly to select the auto on time. To conrm, stop pressing and wait for
the conrmation tone.
2. Press TIMER OFF repeatedly to select the auto o time. To conrm, stop pressing and wait for
the conrmation tone. Both ON/OFF LEDs will light up. The unit is now programmed to auto
on/o.
To change the auto on/o time setting, repeat from step 1.
To cancel the auto on/o time setting, set the timer to 0.0.
Using the Dry Mode
For the best dehumidifying eect, keep all windows
and doors closed.
1. Remove the drain outlet plug from the back of the
unit.
2. Connect one end of the drain tube to the drain
outlet opening and the other end to your drain area.
3. Press MODE and select “Dry” to start drying.
To stop drying, press MODE to switch to other modes or
switch o the unit. Make sure all water is drained before
removing the drain tube and replacing the drain outlet
plug onto the back of the unit.
Fan speed and temperature cannot be adjusted under dry mode.
SAC07C15E_IB_5L_150126_grace.indd 27 26/1/15 5:22 pm

Sandstrom SAC07C15E Specifications

General

Brand	Sandstrom
Model	SAC07C15E
Category	Air Conditioner
Language	English